Optional Accessories

CARPET SHAMPOO SYSTEM SET-UP (cont)

8Taking care to avoid spilling liquid on the Sentria™ system or the floor, place the opening in the bottom front of the Shampoo Tank over the Air Exhaust Port

(19)on the unit. Angle the Shampoo Tank outward from the unit until the arrows line up. Next, slide the Shampoo Tank down over the locking pins on the Air Exhaust Port.

Rotate the Shampoo Tank toward the unit (clockwise) to lock it in place. >

9 Push the round elbow of the small flexible hose into the hole in the tray until it snaps into place. Firmly insert the other end over the fitting at the bottom front of the Shampoo Tank. •

USING THE CARPET SHAMPOO SYSTEM

1To set the nozzle to the proper height, step on the Toe- Touch Control Upper Pedal (8) as often as necessary to lower the nozzle to its lowest position. >

NOTE: Forcing the brushroll into the surface of the carpet decreases its ability to thoroughly clean the carpet and could damage the belt and brushroll.

Turn the Suds Control Valve all the way to the right

2 (clockwise) to the ON position. Turn the Sentria system ON and engage Tech Drive® power assist (see page 8 for details). Suds flow will begin immediately.

Control the amount of suds by turning the Suds Control Valve left (counter-clockwise) for decreased suds flow and right (clockwise) for increased suds flow. Turning the valve all the way to the left (counter-clockwise) to the OFF position will stop the flow of suds completely.

Stopping the flow of suds allows you to thoroughly brush all the suds into the carpet before applying more suds. This also lets you spot scrub badly soiled areas. >

32