Kodak 9.1 manual Determining whether your phone line is dedicated or shared

KODAK HERO 9.1 All-in-One Printer

Determining whether your phone line is dedicated or shared

To connect your printer for faxing correctly, you need to determine whether your phone line is shared or dedicated.

•A dedicated phone line is one that has only this printer and no other devices connected to it. If you have a dedicated line, connect your printer as described for your type of phone service (see Connecting to a standard telephone service, page 93, Connecting to a Digital Subscriber Line (DSL), page 93, or Connecting to an Internet or cable telephone service (Voice-Over-Internet Protocol or VOIP), page 94).

•A shared phone line is one that has several devices connected to it, such as a phone and/or answering machine as well as the printer. If you have a shared line, connect your printer in one of the following ways, based on the devices you have connected to the same phone line.

If you share the line with an answering machine or telephone:

1.Connect one end of the phone cord that came with the printer into the LINE IN phone port on the back of the printer.

2.Connect the other end of the phone cord into either a wall phone jack or a DSL filter, depending on the type of telephone service you use.

3.Connect one end of the phone cord for your answering machine into the EXT OUT phone port on the back of the printer.

4.Connect the other end of the phone cord into the answering machine or telephone.

NOTE: If you have an answering machine, set the number of rings to answer on the printer to a higher number than the rings to answer for the answering machine (see Rings to Answer, page 97).

Configuration for connecting an answering machine with a standard telephone service

Phone with answering machine

www.kodak.com/go/aiosupport 95