Kodak 9.1 manual Settings Description, Select Copy & Print Print Photo

KODAK HERO 9.1 All-in-One Printer

Print Photos Option	Settings	Description
Print Size	4 x 6 (default)	If the selected print size is smaller than
	4 x 7	the paper in the paper tray, the printer
	5 x 7	automatically arranges the pictures to
		best fit the paper size.
	If the bottom tray is
	selected, the following
	choices also appear:
	4 x 8
	4 x 12
	8 x 10
	8.5 x 11 or A4
Tray Selection	Top Tray (default)	Picture prints on the paper in the top
		tray.
	Bottom Tray	Picture prints on the paper in the
		bottom tray.
Quality	Best (default)	The printer detects when you load photo
		paper and sets Best quality
		automatically.
Scene Balance	On (default) / Off	Adjusts the image brightness to correct
		for underexposure and reduces the
		variation in contrast in different areas of
		the picture.
Add Date to Prints	No (default) / Yes	Prints the date the picture was taken or
		last edited in a corner of the print.
Transfer All to PC		Your printer and computer must be
		connected with a USB cable.
		To transfer all the pictures on the
		memory card to your computer, press
		on the control panel.
• Save as Defaults	No (default) / Yes	To save settings as the new default,
		touch Yes.

NOTE: You can also adjust the print photo options using the Online Printer Management Tool. When viewing the tool in your browser (see Accessing the Online Printer Management Tool, page 20), select the Settings tab, then

select Copy & Print > Print Photo.

7. When you have finished changing settings, press to begin printing.

IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.

www.kodak.com/go/aiosupport 59