Changing from USB to a wireless connection

Adding a wireless network connection to a USB-connected computer

You can change the way you connect to your printer at any time.

To change the printer connection type from USB to a wireless (Wi-Fi) network:

If your printer is connected to a computer with WINDOWS OS:

1.Disconnect the USB cable from your printer and computer.

2.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 9.

3.On your computer, disable any firewall you have installed until you have successfully completed the installation.

4.Select Start > All Programs > Kodak > KODAK Printer Network Setup Utility.

•If your wireless printer (example: Kodak HERO 9.1+0229) is not listed:

b.Select your printer from the list, then click Next.

When your printer is detected, driver installation begins.

•If your wireless printer (example: Kodak HERO 9.1+0229) is listed:

a.Select the printer that is connected to your network.

When your printer is detected, driver installation begins.

5.When driver installation is complete, click Done.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, Kodak HERO 9.1+0229).

1.Disconnect the USB cable from your printer and computer.

2.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 9.

3.Select Apple > System Preferences.

4.Under Hardware, select Print & Fax or Print & Scan.

5.Click + in the dialog box.

6.Select your printer from the list.

7.Click Add, if required.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, Kodak HERO 9.1+0229).