Networking Your Printer

Connecting to a WPS wireless router

If your router supports Wi-Fi Protected Setup (WPS), use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.

To connect to a network using WPS:

1.Press .

2.Touch , then touch Network Settings.

3.Touch Wi-Fi Setup Wizard.

NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.

4.Touch WPS Connect.

5. Select one of two methods of connecting:

IMPORTANT: Before you make a selection on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet Service Provider or router device manufacturer’s documentation for more information.

Pressing a button

Entering a PIN

 

 

 

 

NOTE: You will have two minutes to

a Touch Generate WPS PIN.

press or select the WPS button. It

b In your wireless router’s software,

may be a button on the device or

locate the PIN screen.

a virtual button in the device’s

c Enter the PIN you received on the

software.

 

LCD into the PIN screen, then

a Touch Push Button Configuration.

follow the router’s instructions.

d Touch OK on the control panel.

b Press or select the WPS button for

 

your wireless router.

 

c Touch OK on the control panel.

 

 

 

12

www.kodak.com/go/aiosupport

Page 18
Image 18
Kodak 9.1 Connecting to a WPS wireless router, Touch Wi-Fi Setup Wizard Touch WPS Connect, Touch Push Button Configuration