Kodak 9.1 manual Entering fax sender information, If you have an answering service

Faxing

If you have an answering service:

If you have an answering service that uses a computerized system for recording messages remotely for the same phone line that you use for your all-in-one printer, then you can set up a distinctive ring to receive faxes automatically (see Distinctive Ring, page 98).

If you do not set up a distinctive ring, you can still receive faxes manually (see Receiving a fax manually, page 107).

Entering fax sender information

Fax sender information appears in the header of any fax that you send from your all-in-one printer. Typically this is your name or your business name and your fax number.

NOTE: If you do not enter fax sender information, the header on faxes that you send will be blank.

To enter fax sender information:

1.Press .

2.Touch , then touch Fax.

3.Touch Fax Settings, touch Fax Sender Information, then touch a field to enter:

•your name or business name

•your fax number

4.Press OK to save the information.

96 www.kodak.com/go/aiosupport