Kodak 9.1 manual Print Fax After Failure Only

KODAK HERO 9.1 All-in-One Printer

Fax Setting

Options

Description

Print Fax	After Failure Only	The Fax Confirmation Page contains the
Confirmation Page	(default) / Never /	time and date, the number you called,
	Always	the number you called from, and
		whether the transmission was
		successful.
Print Fax Settings	--	To print the current fax settings, load
		letter or A4 paper, then press		.
Print Fax Cover Page	--	The Fax Cover Page shows the date and
		headings for To and From information for
		your fax. Use this cover page, if needed,
		when sending a fax.
		To print a Fax Cover Page, load letter or
		A4 paper, then press	.
Print Fax Activity Log	--	The Fax Activity Log contains
		information (date, time, duration,
		to/from, number of pages, and more)
		about the last 30 faxes sent and/or
		received.
		To print a Fax Activity Log, load letter or
		A4 paper, then press	.
Dialing Mode	Tone (default) / Pulse	Determines how the printer dials a fax
		number.
		Tone dialing (the more common
		method) uses tones to dial a phone
		number. It is faster and more reliable
		than pulse dialing, which uses a series of
		pulses to dial a phone number.
		Traditionally, pulse dialing was used by
		rotary phones; tone dialing is used by
		touch-tone phones.
Error Correction	On (default) / Off	Error correction is applied only when
		sending black and white faxes. It reduces
		the loss of data, which can occur on poor
		quality phone lines.
		Error correction increases the send time
		on poor quality phone lines, but the
		transmission is more reliable. (Error
		correction does not apply to faxes being
		received.)
		If you are using Vonage or Magic Jack,
		we recommend that you set Error
		Correction to OFF.

www.kodak.com/go/aiosupport 99