Kodak 9.1 manual Automatically one time

Faxing

Fax Setting	Options	Description
Redial if No Answer	Yes (default) / No	If the fax number you call does not
		answer, the printer will redial the number
		automatically one time.
Busy Redial	0 to 12	The number of times that the fax will
Attempts	(default is 5)	attempt to redial a busy number.
Disable Call Waiting	No (default) / Yes	If you have call-waiting service on your
		phone line, you can disable it so that an
		incoming call does not interrupt your fax
		transmission.
		Select Yes to disable call waiting, then
		enter the Call-Waiting Disable Code
		(below).
		NOTE: You must enable call waiting
		manually after your fax
		transmission.
Call-Waiting Disable	*70 (default)	The printer automatically dials the
Code		Call-Waiting Disable Code before dialing
		the number to which you are sending a
		fax. This code disables call waiting for
		the duration of the fax, preventing
		incoming calls from interrupting your fax
		transmission.
		The usual code to disable call waiting is
		the default *70. If the call waiting disable
		code is different in your area, touch
		Call-Waiting Disable Code, then touch
		the backspace button to erase the
		current code. Use the keypad to enter
		the correct code, then press OK.
Distinctive Ring	Any ring (default) /	This service, available from most phone
	Single Ring / Double	companies, adds multiple phone
	Ring / Triple Ring	numbers to one phone line. Each phone
		number then has a distinctive ring
		pattern (single, double, or triple ring) to
		let you know which number is ringing.
		Select the ring pattern assigned to the
		phone number for the printer so the
		printer can receive faxes automatically.
Fax Speaker	On (default) / Off	The fax speaker allows you to hear the
		dial tone and initial fax tones when
		sending faxes.

98 www.kodak.com/go/aiosupport