Kodak 9.1 manual Status lights, Power status light, Wi-Fi status light, Power light What it means

Troubleshooting

Status lights

The status lights indicate the condition of the printer. There are two status lights on the printer: one that indicates power, the other indicates Wi-Fi status.

Power status light

Power light	What it means
Off	• The printer is turned off.
	– Press the on/off button to turn on power.
	• The printer does not have power.
	– Make sure that the power cord is plugged into the back
	of the printer and into an electrical outlet, and that the
	electrical outlet has power.
Blinking	The printer is busy.
	• Wait for the printer to finish the task.
On	The printer is ready.

Wi-Fi status light

Wi-Fi status light	What it means
Off	The Wi-Fi radio is either turned off or is turned on but not
	connected to a wireless network.
Blinks continuously	The Wi-Fi radio is turned on and the printer is searching for
	available wireless networks within range.
Blinks intermittently	The Wi-Fi radio is turned on and the printer cannot find any
	available wireless networks within range, or the Wi-Fi radio
	connection has been interrupted or is too weak to send signals.
	To find and connect to an available wireless network within
	range, turn the Wi-Fi radio off, and run the Wi-Fi Setup Wizard
	(see Connecting to a wireless network, page 9).
On	The Wi-Fi radio is turned on and there is a working connection
	between the printer and a wireless network.

126 www.kodak.com/go/aiosupport