Kohler 8/10/12RESVL manual Introduction, List of Related Literature, Transfer Switch Literature

Introduction

This manual provides operation and maintenance instructions for residential/commercial model 8/10/12RESV and RESVL generator sets equipped with Kohler RDC2 or DC2 generator set/transfer switch controllers. See Figure 1. The RDC2 and DC2 controllers control the generator set and the optional Model RXT transfer switch.

This generator set is approved for use in stationary applications in locations served by a reliable utility power source. Have the generator set installed by an authorized distributor/dealer or service technician. Refer to TP-6879, Installation Manual, for installation instructions.

Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this publication and the products represented without notice and without any obligation or liability whatsoever.

Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual. Keep this manual with the equipment for future reference.

The equipment service requirements are very important to safe and efficient operation. Inspect the parts often and perform required service at the prescribed intervals. Obtain service from an authorized service distributor/ dealer to keep equipment in top condition.

Figure 1 RESV/RESVL Generator Set

List of Related Literature

Figure 2 identifies related literature available for the generator sets covered in this manual. Only trained and qualified personnel should install or service the generator set.

Generator Set Literature	Part Number
Installation Manual, Model
8/10/12RESV/RESVL Generator Set	TP-6879
Transfer Switch Literature
Operation/Installation Manual, Model
RXT Automatic Transfer Switch	TP-6807
Operation/Installation Manual, Model
RDT Automatic Transfer Switch	TP-6345
Installation Manual, Model RSB
Automatic Transfer Switch	TP-6486
Operation Manual, Model RSB
Automatic Transfer Switch	TP-6487
Accessory Literature
Operation Manual, OnCuer Plus
Software	TP-6928
Operation Manual, SiteTecht Software	TP-6701
Installation Instructions, Load Control
Module (LCM)	TT-1574
Installation Instructions, Programmable
Interface Module (PIM)	TT-1584
Instructions, Firmware Update Using
USB Utility	TT-1636
Instructions, Load Shed Kit	TT-1609

Figure 2 Related Literature

TP-6880 10/14 Introduction 9