Konica Minolta Fax 9930 user manual Loading Paper, To 75% of the original length

Loading Paper

Your fax machine can hold up to 250 sheets of standard- weight (20 lb. [75 g/m2]) paper in letter, legal, and A4 sizes. For best results, use paper specially made for laser printers or photocopiers.

!	Load paper into the tray print side DOWN.
	If you are loading letterhead, place the paper print side
	down, with the letterhead near the handle part of the
!	tray.
	If you are receiving a document created on legal-size
	paper, the document will be reduced to fit on letter size
	paper. The vertical length of the received page image is
	automatically reduced to fit on the paper loaded, down
	to 75% of the original length.

1Pull out the paper tray.

2Adjust the paper guides (a) to the width of your paper. Set the left guide all the way to the left. Set the right guide to the marker for the size you’re using.

3Lift up the paper length adjustment guide (b) and set it to the length of your paper. If using legal size paper, rotate the extension (c) at the back of the tray.

! Your fax machine is set at the factory to use letter size

b

c

paper. To use a different paper size, change the 1’ST

PAPER SIZE user function setting to match your new

paper size.

See “Setting Basic Features, Other Basic Parameters,

Paper-Size Setting.”

c a

a

4Remove the paper from its wrapper. Note the “print side” notice printed on the label. Fan the paper.

5Load the paper into the paper tray, print side down.

User’s Manual 39