Entering symbols
While entering text, you can also enter symbols by pressing 
until you see the symbol you want. Using this method, you have access to the following symbols:
. & @ , - ‘ : ; ? / “ ( ) _
To access the full set of symbols:
1.Press 
right to highlight the current mode and press 
to enter the menu.
2.Select 
Symbols.
3.Press 
down to view the list of symbols.
4.Press the number key corresponding to the symbol you want.
Changing modes
To enter characters that belong to a mode other than the one you’re in, you’ll need to change modes. For example, to enter numbers in an email
address while in 
mode, change to 
mode, enter the number, and
then change back to 
mode to complete the address.
40 | Storing Contacts |
