Understanding the control panel lights

Memory full

Light sequence:

Continue—On

Ready—On

Toner Low/Replace PC Kit—On

Error—On

What this light sequence means:

The printer is processing data, but the memory used to store pages is full.

What you can do:

Press Continue

to clear the message and continue

 

printing the job (the job may not print correctly).

Press and release Cancel

to cancel the print job.

Press and hold Cancel

to reset the printer.

To avoid this error in the future:

Simplify the print job. Reduce the complexity of the page by reducing the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros.

Install additional printer memory (see Adding a memory card on page 72).

Short paper

Light sequence:

Continue—On

Ready—On

Load Paper—On

Error—On

What this light sequence means:

The paper length is too short to print the formatted data. This occurs when the printer does not know the print media size loaded in the tray, or there is a problem feeding the print media.

What you can do:

Make sure the print media you loaded is large enough.

Open the front door, clear the paper path, and close the door to resume printing (see Clearing jams on

page 56).

Press Continue

to clear the code and continue

 

printing the job.

 

Press Cancel

to cancel the print job.

33

Page 33
Image 33
Lexmark 250dn manual Understanding the control panel lights Memory full, Printing the job the job may not print correctly