Adding a memory card
Adding a memory card
The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB).
CAUTION: If you are installing a memory card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.
Memory options designed for other Lexmark printers may not work with your printer.
1Access the system board (see Accessing the system board on page 69).
2Push open the latches on both ends of the memory
connector.
3 Unpack the memory card.
Warning: Memory is easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4Align the notches on the bottom of the card with the notches on the connector.
5Push the memory card firmly into the connector until the
latches on either end of the connector snap into place.
Some force may be required to fully seat the card.
6Make sure each latch fits over the notch on each end of the card.
7Close the side door.
8Close the rear exit.
9Close the front door.
10See Recognizing installed options on page 73.
72
