Lexmark 350 Series manual Adjusting the brightness of photos

Models: 350 Series

1 62
Download 62 pages 40.28 Kb
Page 31
Image 31

cPress to save your selections, and then go back to the Print Preview screen.

18Press to print.

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Adjusting the brightness of photos

1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 19.

2Insert a memory card or flash drive. For more information, see “Inserting a memory card” on page 20 or “Inserting a flash drive” on page 21.

3Press or repeatedly until View and Select appears on the display.

4Press .

5Press to continue.

6Press or to navigate through the photos.

7Press to select a photo for printing.

8Press .

The Photo Edit Mode menu appears.

9Press or repeatedly until Brightness appears on the display.

10Press or to adjust the brightness of the photo.

Note: The image on the display does not accurately reflect the image when printed.

11Press to save your changes and go back to the photo selection screen.

12Press or to select the number of copies to print.

Note: Pressing when the number of copies is set to 1 will deselect the image. Pressing when the image is not selected will select the image.

13You can select more photos for printing and editing by repeating step 6 through step 12.

14Press to go to the Print Preview screen.

15If you want to adjust the print settings:

aPress .

bMake your selections.

cPress to save your selections, and then go back to the Print Preview screen.

16Press to print.

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Editing photos

31

Page 31
Image 31
Lexmark 350 Series manual Adjusting the brightness of photos