Lexmark 415, 28D0550, 28D0500, CX410 Standard USB menu, Understanding printer menus 140, Set Zone

Understanding printer menus		140
	Use		To
	View Address		Show the assigned AppleTalk address.
			Note: The AppleTalk address can be changed only from the Embedded Web
			Server.
	Set Zone		Provide a list of AppleTalk zones available on the network.
	[list of zones available on the network]		Note: The default zone for the network is the factory default setting.
Standard USB menu
	Use	To
	PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job received
	On	through a USB port requires it, regardless of the default printer language.
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
			PostScript emulation if the PS SmartSwitch is set to On. It uses the default
			printer language specified in the Setup menu if the PS SmartSwitch is set to
			Off.
	PS SmartSwitch	Set the printer to automatically switch to PS emulation when a print job received
	On	through a USB port requires it, regardless of the default printer language.
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
			PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
			language specified in the Setup menu if the PCL SmartSwitch is set to Off.
	NPA Mode	Set the printer to perform the special processing required for bidirectional
	On	communication following the conventions defined by the NPA protocol.
	Off	Notes:
	Auto	• Auto is the factory default setting. Auto sets the printer to examine data,
			determine the format, and then process it appropriately.
		• The printer automatically restarts when changing the setting from the printer
			control panel. The menu selection is then updated.