Lexmark CX410, 415, 28D0550 Using Schedule Power Modes, Adjusting the brightness of the display

Saving money and the environment 203

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > General Settings > Timeouts > Hibernate Timeout

2Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.

3Touch .

Using Schedule Power Modes

Schedule Power Modes lets you schedule when the printer goes into a reduced power state or into Ready state. Note: This feature is available only in network printers or printers connected to print servers.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Schedule Power Modes.

3From the Action menu, select the power mode.

4From the Time menu, select the time.

5From the Day(s) menu, select the day or days.

6Click Add.

Adjusting the brightness of the display

To save energy, or if you are have trouble reading your display, adjust the brightness of the display. Available settings range from 20–100. The factory default setting is 100.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings.

3In the Screen Brightness field, enter the brightness percentage you want for the display.

4Click Submit.