Lexmark S400 Series Working with photos, Using a memory card or flash drive with the printer

Working with photos

Using a memory card or flash drive with the printer

Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove the memory card from the camera or the flash drive from the computer and insert it directly into the printer.

1Insert a memory card into the card slot or a flash drive into the USB port.

Inserting a memory card

WI

PRINTING FI

M

E

M

O

R

Y

S

T

I

C

K

Inserting a flash drive

					WI
					PRINTING FI
				IV	E
		H	DR
	AS
FL

Notes:

•Insert the card with the brand name label facing right.

•Make sure any arrows on the card point toward the printer.

•If necessary, connect the memory card to the adapter that came with it.

•Make sure that the memory card inserted is supported by the printer. For more information, see “Supported memory cards and file types” on page 39.

Notes:

•The flash drive uses the same port that is used for a PictBridge camera cable.

•An adapter may be necessary if your flash drive does not fit directly into the port.

WI

PRINTINGFI

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

2Look for Memory Card Detected or Storage Device Detected on the display.

Notes:

•If the printer does not recognize the memory device, then remove and reinsert it.

•If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is in the card slot, then a message appears on the display prompting you to choose which memory device to use.

Printing

38