To set up a connection between the printer and a Bluetooth-enabled device:

1Insert a USB Bluetooth adapter into the USB port located on the front of the printer.

WI

 

PRI

 

NTI F

I

NG

Bluetooth Dongle Connected appears on the display.

Note: A Bluetooth adapter is not included with the printer.

2From the printer control panel, press .

3Press the arrow buttons to scroll to Bluetooth Setup, and then press.

4Press the arrow buttons to scroll to Discovery, and then press.

5Make sure Discovery is set to On. If necessary, press the arrow buttons to scroll to On, and then press. The printer is now ready to accept a connection from a Bluetooth-enabled device.

6Configure the Bluetooth-enabled device to set up a connection to the printer. For more information, see the documentation for your Bluetooth device.

Note: If the Bluetooth Security Level on the printer is set to High, then you must enter a pass key.

Printing

44

Page 44
Image 44
Lexmark S400 Series manual Bluetooth Dongle Connected appears on the display