Lexmark Z600 Series manual Printing labels, Build your booklet, Load the labels

Step 4: Build your booklet

After your document prints, stack and bind your booklet.

To build your booklet:

1Remove the first bundle from the paper exit tray, fold it in half, and then set it aside.

2Remove the next bundle, fold it in half, and then stack it on top of the first bundle.

3Continue to stack the bundles on top of each other until your booklet is complete.

4Bind the bundles to complete your booklet.

Printing labels

You can load up to 25 sheets of labels, depending on the thickness of the sheets.

Step 1: Load the labels

•Use labels designed for inkjet printers.

•If your labels include instructions, read them carefully.

•Load the labels vertically against the right side of the paper support.

•Make sure your labels are not used or damaged.

Printing labels

27