LG Electronics AVS2400 specification

22Installation

7. Set the options of the Network menu and press button.

3

Installation

•DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically. If you select this option, IP address, Subnet Mask and Default Gateway options cannot be set.

•IP Address: Enter the static IP address of the device.

•Subnet Mask: Enter the subnet mask IP address.

•Default Gateway: Enter the default gateway IP address.

•Hostname: Enter the hostname.

•DNS Servers: Enter the IP address to configure as DNS servers. (The IP addresses of the DNS server are separated by blanks.)

•Name Search Domains: Enter the domain names to search when resolving hostnames.

•Network Speed: Select the speed and duplex capability of your network. (If the quality of the video and audio call is low, change the network speed to low value.)

•NTP Server Hostname: Enter the hostname or IP address of the NTP server.

8. Set the options of the Audio menu and press

button.

Image 22

LG Electronics AVS2400 owner manual Set the options of the Network menu and press button

Contents

Video Conference Monitor Safety Information Regulatory Information FCC Part Lamps Contain Mercury, Dispose Properly Disposal of your old applianceEEE Compliance with Directive. for Turkey only Or moisture, does not operate normally, or has been dropped On Safety On Installation On Disposal On CleaningOn Repacking Lifting and moving the VCS Contents Mode settings Customizing OSD settingsMenu settings Specifications Features Introduction VCS Body Remote control and batteries Unpacking Overview Front of the VCS Rear of the VCS Power cord Inlet AC in Connects the power plugOSD lock / unlock function Remote Control Battery Installation Connections Attaching the stand Using the Kensington security system optional Disassembling the stand Audio Connecting to a PCVideo Hdmi connection SUB connection Connecting Network Connecting Power Connecting Headphones Connecting a Microphone Adjusting the angle of the Monitor and camera Attaching the back cover Initial settings for VCS Default administrator password is 1 2 3 Set the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu User Preferences setup Access User Preferences from which you can do the following Administration Using the Remote Control Administrator PreferencesAccessing Administrative Features Administration from a Web Browser Installation Configuring Call Preferences Controlling Remote Administration Configuring Security PreferencesAdmission Control Changing the Administrator Password Setting the User Password Configuring Audio Behaviors Viewing Recent Configuration ChangesConfiguring Audio Codec Order Adjusting Audio Levels Administrator Preferences AudioTesting Primary Audio Output Selecting the Active Microphone Specifying the Hostname and Domain Name Service DNS Servers Configuring Network UsageSpecifying a Locally Configured IP Address Specifying Network Speed Specifying an NTP Server Specifying a Vlan TagEnabling IPv6 Addressing Enabling Network Address Translation NAT Restricting Reserved Ports Call Type Number of Required UDP and TCP Ports Configuring Quality of ServiceConfiguring LifeSize Transit Preferences Call Type Number of Required UDP Ports Disabling Access to the Local Directory Populating the Corporate Directory Reading from an Ldap Server Ldap preferences are not configuredConfiguring Auto Discovery Server and receive data was successful Configuring Communications Preferences Enabling Telepresence Receiving Presentations Configuring Dialing OptionsSpecifying H.323 Settings Virtual Link Data Sharing Configuring SIP Settings Enabling H.460 Support for H.323 Calls Configuring Appearance Preferences Video Layout Preferences Locking the Camera Presets Configuring Video BehaviorsConfiguring Display Preferences Controlling the Camera Use by Far End Users Adjusting the MTU of Video Packets Configuring System SettingsAdjusting Video Encoder Quality Selecting Priority of Quality Metrics for Source Video Navigate to Administrator Preferences System License Keys Rebooting the System automaticallyManually Setting System Date and Time Identifying the System Navigate to Preferences System License Keys Installing a License Key ManuallyHours to complete Using Diagnostics Preferences and Tools Restoring Default Settings Using Network Utilities Using Camera Diagnostic PreferencesRebooting the System Do Not Disturb Using Advanced Directory Features Exclusive Web Administration FeaturesSaving and Restoring a System Configuration Downloading Call History Copying Screen Text to the ClipboardUpgrading System Software Troubleshooting Upgrade Failures Managing Calls from the Web Administration InterfaceUpgrading your System Software Upgrade Error Codes Placing a Call Near End Video QualityPlacing a Call from the Redial List To place a call from the directory, follow these steps Placing a Call from the DirectoryManually Dialing a Number from the Main Screen Manually Dialing a Video Number Answering or Rejecting a Call Manually Dialing a Voice Number Call Status Using System Do Not DisturbManaging a Call Caller ID Managing PIP Hiding or Showing User Interface ElementsManaging Audio Managing Video Layout Far End Video Near End Video Screen Layout Far End VideoNear End Video Far End Video Near End Video During a Ending a Call from the Call Manager Viewing Call StatisticsEnding a Call To hang up a call, press OK again to end the call Removing an Entry from the Redial List Managing the Redial ListLocking and Unlocking Entries in the Redial List Adding a Redial List Entry to the Directory Copying an Entry from the Corporate to the Local Directory Managing the DirectoryAdding an Entry to the Local Directory Removing an Entry from the Local Directory Editing an Entry in the Local Directory Adding an Entry to the Meetings Directory Menu settings Customizing OSD settingsNavigation button overview Supported Input Description Mode settings Please contact the service center Check the power cable is connected correctlyCheck the main power switch is turned on Check the input voltage is correct You can not make a call Configure your display againConnected. Check the signal cable and try again Appears on the screen Specifications Diagnostic logging 280 x720p @ 25 to 30 fps ResolutionDo Not Disturb mode Directory Service H.350 Admin and User level password Save, Lock, Remove Redial List featuresBackup and Restore capability Ability to disable HTTP, SSH and Telnet services Warranty Card Appendix