LG Electronics AVS2400 You can not make a call, Appears on the screen, On the screen background

70Troubleshooting

6

Troubleshooting

You can not make a call.	If a call does not successfully connect, verify that you have dialed a working number and
	that the far end destination is powered on and available. Verify that the network is ready
	and available. Network status is indicated at all times in the status bar. If the VCS system
	is connected to the local network, a green network status icon appears. A yellow or red
	network status icon indicates a problem with the network connection.
The system does not work with	Reboot the system that is not responding to commands from the remote control.
the remote control.
The message “OUT OF RANGE”	This message appears when the signal from the PC (video card) is out of horizontal or
appears on the screen.	vertical frequency range of the display. See the ‘Specifications’ section of this manual and
	configure your display again.
The message “CHECK SIGNAL	This message appears when the signal cable between your PC and your display is not
CABLE” appears on the screen.	connected. Check the signal cable and try again.
The message “OSD LOCKED”	You can secure the current control settings, so that they cannot be inadvertently
appears on the screen	changed. You can unlock the OSD controls at any time by pushing the MENU button for
	several seconds: the message “OSD UNLOCKED” will appear.
Display Position is incorrect.	Press the AUTO button to automatically adjust your display image to the ideal setting.
	If the results are unsatisfactory, adjust the image position using the H position and V
	position icons in the on-screen display.
On the screen background,	Press the AUTO button to automatically adjust your display image to the ideal setting. If
vertical bars or stripes are visible.	the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in
	the on-screen display.
Any horizontal noise appearing	Press the AUTO button to automatically adjust your display image to the ideal setting.
in any image or characters are	If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the
not clearly portrayed.	on-screen display.
Do you see an “Unrecognized	Make sure you check if the video card supports Plug&Play function.
monitor, Plug&Play (VESA DDC)
monitor found” message?