Safety Information | 5 |
|
|
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image
Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized service center for repair.
Avoid high temperatures and humidity.
On Cleaning
•Unplug the display before cleaning the face of the display screen.
•Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because
•When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
•Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal
•Do not dispose of this product with general household waste.
•Disposal of this product must be carried out in accordance to the regulations of your local authority.
Lifting and moving the VCS
When moving or lifting the VCS, read the following to prevent the VCS from being scratched or damaged and for safe transportation regardless of its type and size.
•Moving the VCS in the box is recommended.
•Before moving or lifting the VCS, disconnect the power cord and all cables.
•When holding the VCS, the screen should face away from you to prevent the screen from being scratched.
•Hold the top and bottom of the VCS frame firmly.
•When transporting the VCS, do not expose the VCS to jolts or excessive vibration.
•When transporting the VCS, keep the VCS upright. Never turn the VCS on its side or tilt towards the left or right.
•When moving the VCS, do not carry it by the camera.
1 SafetyInformation
