Supported Input Description | LG Electronics AVS2400 specification

Monitor settings	67

	MENU		Supported Input	Description

PICTURE		BRIGHTNESS	HDMI (Digital signal input.)	You can adjust the level of the Brightness. The lower the level,
			D-SUB (Analog signal input.)	the softer the image.
		CONTRAST		You can adjust the level of the Contrast. Increases or decreases
				the gradient of the video signal.

		SHARPNESS		You can adjust the level of the Sharpness..

		BLACK LEVEL	HDMI (Digital signal input.)	Sets black level of the screen to proper level. This function is
				available in the HDMI mode only.
				• LOW: The reflection of the screen gets darker.
				• HIGH: The reflection of the screen gets brighter.

COLOR		COLOR TEMP	HDMI (Digital signal input.)	Select PRESET or USER option to set the value.
			D-SUB (Analog signal input.)
		PRESET	D-SUB (Analog signal input.)	Select the screen color.
				• sRGB: Set the screen color to fit the sRGB standard color
				specification.
				• 6500K: Slightly reddish white.
				• 7500K/8500K: Set the screen color to default value.
				• 9300K: Slightly bluish white.

		RED		This option is activated when you select the [COLOR TEMP]
				option to [USER]. Set your own red color levels.

		GREEN		This option is activated when you select the [COLOR TEMP]
				option to [USER]. Set your own green color levels

		BLUE		This option is activated when you select the [COLOR TEMP]
				option to [USER]. Set your own blue color levels.

		GAMMA		Set your own gamma value. : GAMMA0 / GAMMA1 / GAMMA2
				On the monitor, high gamma values display whitish images
				and low gamma values display blackish images.

DISPLAY		HORIZONTAL	D-SUB (Analog signal input.)	To move image left and right.

		VERTICAL		To move image up and down.

		CLOCK		To minimize any vertical bars or stripes visible on the screen
				background.
				The horizontal screen size will also change.

		PHASE		To adjust the focus of the display.
				This item allows you to remove any horizontal noise and clear
				or sharpen the image of characters.

		OVERSCAN	HDMI (Digital signal input.)	If you set to [ON], the overscan function is activated.
				This function is available in the HDMI mode only.

VOLUME		-	HDMI (Digital signal input.)	Use the MODE or AUTO button to adjust the output volume.
			D-SUB (Analog signal input.)	If you press INPUT again, the system volume is muted.

5

Monitor settings

Image 67

LG Electronics AVS2400 owner manual Supported Input Description

Contents

Video Conference Monitor Regulatory Information FCC Part Safety Information Or moisture, does not operate normally, or has been dropped Disposal of your old applianceEEE Compliance with Directive. for Turkey only Lamps Contain Mercury, Dispose Properly On Installation On Safety Lifting and moving the VCS On CleaningOn Repacking On Disposal Contents Specifications Customizing OSD settingsMenu settings Mode settings Introduction Features Unpacking VCS Body Remote control and batteries Front of the VCS Overview Rear of the VCS Power cord Inlet AC in Connects the power plugOSD lock / unlock function Battery Installation Remote Control Attaching the stand Connections Disassembling the stand Using the Kensington security system optional Hdmi connection Connecting to a PCVideo Audio SUB connection Connecting Power Connecting Network Connecting a Microphone Connecting Headphones Attaching the back cover Adjusting the angle of the Monitor and camera Default administrator password is 1 2 3 Initial settings for VCS Set the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu Access User Preferences from which you can do the following User Preferences setup Administration from a Web Browser Administrator PreferencesAccessing Administrative Features Administration Using the Remote Control Installation Configuring Call Preferences Controlling Remote Administration Configuring Security PreferencesAdmission Control Setting the User Password Changing the Administrator Password Configuring Audio Behaviors Viewing Recent Configuration ChangesConfiguring Audio Codec Order Selecting the Active Microphone Administrator Preferences AudioTesting Primary Audio Output Adjusting Audio Levels Specifying Network Speed Configuring Network UsageSpecifying a Locally Configured IP Address Specifying the Hostname and Domain Name Service DNS Servers Specifying an NTP Server Specifying a Vlan TagEnabling IPv6 Addressing Restricting Reserved Ports Enabling Network Address Translation NAT Call Type Number of Required UDP Ports Configuring Quality of ServiceConfiguring LifeSize Transit Preferences Call Type Number of Required UDP and TCP Ports Populating the Corporate Directory Disabling Access to the Local Directory Server and receive data was successful Ldap preferences are not configuredConfiguring Auto Discovery Reading from an Ldap Server Enabling Telepresence Configuring Communications Preferences Virtual Link Data Sharing Configuring Dialing OptionsSpecifying H.323 Settings Receiving Presentations Enabling H.460 Support for H.323 Calls Configuring SIP Settings Video Layout Preferences Configuring Appearance Preferences Controlling the Camera Use by Far End Users Configuring Video BehaviorsConfiguring Display Preferences Locking the Camera Presets Selecting Priority of Quality Metrics for Source Video Configuring System SettingsAdjusting Video Encoder Quality Adjusting the MTU of Video Packets Identifying the System Rebooting the System automaticallyManually Setting System Date and Time Navigate to Administrator Preferences System License Keys Navigate to Preferences System License Keys Installing a License Key ManuallyHours to complete Restoring Default Settings Using Diagnostics Preferences and Tools Using Network Utilities Using Camera Diagnostic PreferencesRebooting the System Do Not Disturb Using Advanced Directory Features Exclusive Web Administration FeaturesSaving and Restoring a System Configuration Downloading Call History Copying Screen Text to the ClipboardUpgrading System Software Troubleshooting Upgrade Failures Managing Calls from the Web Administration InterfaceUpgrading your System Software Upgrade Error Codes Placing a Call Near End Video QualityPlacing a Call from the Redial List Manually Dialing a Video Number Placing a Call from the DirectoryManually Dialing a Number from the Main Screen To place a call from the directory, follow these steps Manually Dialing a Voice Number Answering or Rejecting a Call Caller ID Using System Do Not DisturbManaging a Call Call Status Managing Video Layout Hiding or Showing User Interface ElementsManaging Audio Managing PIP Near End Video During a Screen Layout Far End VideoNear End Video Far End Video Far End Video Near End Video To hang up a call, press OK again to end the call Viewing Call StatisticsEnding a Call Ending a Call from the Call Manager Adding a Redial List Entry to the Directory Managing the Redial ListLocking and Unlocking Entries in the Redial List Removing an Entry from the Redial List Removing an Entry from the Local Directory Managing the DirectoryAdding an Entry to the Local Directory Copying an Entry from the Corporate to the Local Directory Adding an Entry to the Meetings Directory Editing an Entry in the Local Directory Menu settings Customizing OSD settingsNavigation button overview Supported Input Description Mode settings Check the input voltage is correct Check the power cable is connected correctlyCheck the main power switch is turned on Please contact the service center Appears on the screen Configure your display againConnected. Check the signal cable and try again You can not make a call Specifications Directory Service H.350 280 x720p @ 25 to 30 fps ResolutionDo Not Disturb mode Diagnostic logging Ability to disable HTTP, SSH and Telnet services Save, Lock, Remove Redial List featuresBackup and Restore capability Admin and User level password Warranty Card Appendix