60Operation
Hiding or Showing User Interface Elements
By default, the system information, status bar and navigation bar fade from the screen after a call has been connected for 10 seconds. This interval resets after any interaction with the system. You can adjust the duration of the fade out interval by adjusting the Fade Out Timeout preference in User Preferences : Appearance menu. To hide or show these user interface
elements at any time during a call, press the button.
NOTE
The user interface does not hide if the system is overheating. System overheating icons appear in the status bar.
4
Operation
Managing Audio
You can identify the video caller who is speaking in the call, adjust the volume of the audio, and mute the active microphone.
Identifying the Dominant Speaker
When a video participant in a call is speaking, the dominant speaker icon appears in the display in the video image from that participant.
Adjusting Volume
To adjust the volume in a call, use the button on the remote control. You can also adjust the active microphone volume,
or the treble and bass levels for audio out by adjusting preferences in [User Preferences > Audio] menu.
Muting the Active Microphone
Pressing the mute button on the remote control mutes the active microphone. When the near side active microphone
is muted in a call, the symbol appears.
Managing PIP
Your display shows the
Managing Video Layout
During a call, video from the connected caller appears in your display. You can change the screen layout of near and far end video that appear in the monitor.
To change the screen layout, press the button.