INSTALLATION
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
COOLING SYSTEM
The cooling system has been filled at the factory with a
MUFFLER
This welder is supplied with an adjustable rain cap for the muffler. Install the rain cap using the clamp provid- ed with the outlet facing away from the direction in which this unit will be transported. This will minimize the amount of water and debris that could enter the muffler during transportation.
EXHAUST SPARK ARRESTER
Some federal, state, or local laws may require that engines be equipped with exhaust spark arresters when they are operated in certain locations where unarrested sparks may present a fire hazard. The stan- dard mufflers included with these welders do not qual- ify as spark arresters. When required by local regula- tions, a suitable spark arrester must be installed and properly maintained.
TRAILERS
If you use a
1.Design capacity of the trailer vs. the weight of the Lincoln equipment and likely additional attach- ments.
2.Proper support of, and attachment to, the base of the welding equipment so there will be no undue stress to the framework.
3.Proper placement of the equipment on the trailer to ensure stability side to side and front to back. This includes when being moved and when standing by itself for operation or service.
4.Typical conditions of use, such as travel speed, roughness of the surfaces where the trailer will be used, environmental conditions, likely maintenance.
5.Conformance with federal, state, and local laws. Consult applicable federal, state, and local laws about specific requirements for use on public high- ways.
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
CAUTION
Use of an incorrect arrester may lead to engine dam- age or performance loss. Contact the engine manu- facturer for specific recommendations.
CLASSIC I
