3-126
RRP1.4 COVER TOP MAIN (PL1.1.9)Figure: COVER TOP MAIN Removal
Removal
Before removing the COVER TOP MAIN, remove the PHD and toner cartridges.
1)Remove the COVER TOP (PL1.1.8) from the printer.
2) Release the latch at B from the printer and open the CHUTE ASSY OUT (PL6.1.1).
3) Open the COVER ASSY TOP PHD (PL1.1.10) from the printer.
4) Remove 2 screws securing the COVER TOP MAIN (PL1.1.9) to the printer.
5) Release the hooks at 4 positions securing the rear of the COVER TOP MAIN to th e printer.
6) Raise the COVER TOP MAIN slightly from the printer and extract the left front edg e of the COVER
TOP MAIN deflecting it leftward.
7) Remove the COVER TOP MAIN from the printer.
Replacement
Replace the components in the reverse order of removal.