3-134
RRP1.11 COVER MSI (PL1.1.26)
Figure: COVER MSI Removal
Removal
1) Open the COVER MSI (PL1.1.26) from the front of the printer.
2) Deflecting the left side of the TRAY ASSY MSI (PL1.1.28) inward from the long hole on the left side of
the COVER MSI, extract the pin of the TRAY ASSY MSI from the long hole.
3) Extract the right side pin of the TRAY ASSY MSI from the right long hole of the C OVER MSI.
4) Lowering the tip of the COVER MSI down the printer, pull out the COVER MSI forward and remove.
Replacement
Replace the components in the reverse order of removal.