3-214
RRP7.4 MOTOR ASSY DUP (PL7.1.8)Figure: MOTOR ASSY DUP Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the CHUTE ASSY EXIT. (RRP7.1)
6) Release the hook at 1 position securing the GEAR ROLL (PL7.1.2) to the left sh aft of the ROLL EXIT
(PL7.1.4) from the CHUTE ASSY EXIT (PL7.1.1).
7) Remove the GEAR ROLL from the left shaft of the ROLL EXIT.
8) Release the hook at 1 position securing the GEAR ROLL to the left shaft of the ROLL MID (PL7.1.5)
from the CHUTE ASSY EXIT.
9) Remove the GEAR ROLL from the left shaft of the ROLL EXIT.
10) Remove the GEAR 40/42 (PL7.1.10) from the left side surface of the CHUTE ASSY EXIT.
11) Remove the GEAR 48 (PL7.1.11) from the left side surface of the CHUTE ASSY EXIT.
12) Remove 2 screws securing the MOTOR ASSY DUP to the CHUTE ASSY EXIT.
13) Remove the MOTOR ASSY DUP from the CHUTE ASSY EXIT.
Replacement
Replace the components in the reverse order of removal.