3-212
RRP7.2 ROLL EXIT (PL7.1.4) Figure: ROLL EXIT Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the CHUTE ASSY EXIT. (RRP7.1)
6) Release the hook at 1 position securing the GEAR ROLL to the left shaft of the ROLL EXIT from the
CHUTE ASSY EXIT (PL7.1.1).
7) Remove the GEAR ROLL (PL7.1.2) from the left shaft of the ROLL EXIT.
8) Extract the BEARING EARTH (PL7.1.3) from the left shaft of the ROLL EXIT of the CHUTE ASSY
EXIT.
9) Remove the E-ring securing the right shaft of the ROLL EXIT to the CHUTE ASSY EXIT.
10) Extract the BEARING (PL7.1.7) from the right shaft of the ROLL EXIT.
11) Raise the right shaft of the ROLL EXIT from the CHUTE ASSY EXIT and pull out the ROLL EXIT right
upward.
Replacement
Replace the components in the reverse order of removal.