3-262
RRP12.5 HARNESS ASSY AC SW (PL12.1.11)Figure: HARNESS ASSY AC SW Removal
Removal
1) Remove the COVER TOP MAIN. (RRP1.4)
2) Remove the COVER ASSY FRONT IN. (RRP1.10)
3) Remove the COVER SIDE R. (RRP1.9)
4) Remove 1 screw securing the earth of the HARNESS ASSY AC SW to the LVPS STD (P L12.1.10)
from the printer.
5) From the printer, release the hooks at 2 positions securing the GUIDE HARNESS SW to the swi tch
bracket on the LVPS STD and shift the GUIDE HARNESS SW upward.
6) Shift the switch of the HARNESS ASSY AC SW from the switch bracket of the LV PS STD.
7) Remove the connector (P/J161) on the LVPS STD.
8) Releasing the hooks at 2 positions securing the socket of the HARNESS ASSY AC SW to the rear of
the LVPS STD and pull out the socket rearward.
9) Remove the HARNESS ASSY AC SW from the printer.
Replacement
Replace the components in the reverse order of removal.