Chapter 5 Parts List
5-281
1. Parts List

1.1 Caution for use of parts list

◆The figures indicating the illustrations are the item No. in the list and present cor respondence between
the illustrations and parts.
◆The notation of PL "X.Y.Z" is composed of the plate (PL), item "X.Y", and parts " Z".
◆The alphabet characters in the illustrations represent screws and clips as follows:
"S": screw, "E": E-ring, "KL": KL clip, "C": C-ring, and "N": nut
◆"▼" mark in the illustrations are attached to items indicating assembly parts in the illustratio ns.
◆Encircled alphabetical figures in the illustrations indicate int errupted leader lines. Same characters in
the illustrations represent lines to be connected.
◆The mark "(with 2-5)" attached to assembly parts on the illustratio ns and lists represents that the items
"2, 3, 4, and 5" of that plate are contained and the mark "(with 2-5, PL6.1.1.1) represent that the item "2,
3, 4, and 5" of that plate and the item "1" of the plate "6.1" are contained.
◆The mark "[Same PLX.Y.Z]" attached to parts in the illustrations and lists resents that the parts is the
same as the parts of the item "Z" of the plate "X.Y".
◆The mark "★" attached to the item in the list represents "recom mended spare parts" which can be
usually supplied. (Supply of other parts shall be examined separately.)
◆The mark "✻" attached to parts in the list represents "No te" or "Reference" about that parts is contained
in the same page.
◆"HIGH ASSY" in the list represent the high level assembly parts c ontaining that parts.
For spare parts, refer to the "Spare parts list" which is issued separately.
For the connector (P/J), parts such as harness, wire, etc. in the list , refer to "Chapter 6,
Electric wiring"
It should be noted that configuration of parts may be different or some parts are not
used depending on specifications of OEM.