Minolta 3100 Series - page 135

Chapter 3 Removal and Replacement Procedures
3-133
Removal
1) Release the latch at B from the printer and open the FRONT ASSY IN (PL5.1.1) together with the
CHUTE ASSY OUT (PL6.1.1).
2) Remove 2 screws securing the COVER ASSY FRONT IN to the FRONT ASSY IN.
3) Release the latch at A from the printer and open the CHUTE ASSY OUT.
In the following process, do not separate the COVER ASSY FRONT IN and LINK:R too
far since they are connected.
4) Pull out the COVER ASSY FRONT IN slightly from the FRONT ASSY IN.
5) Release the LINK LEVER: R shaft from the leaf spring at the back of the COVER ASSY F RONT IN
and remove the COVER ASSY FRONT IN.
Replacement
Replace the components in the reverse order of removal.