3-204
RRP6.9 LATCH OUT (PL6.1.18)
Figure: LATCH OUT Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the SPRING LATCH OUT (PL6.1.20) from the CHUTE ASSY OUT (PL6.1.1) of the printer.
6) Release the hooks at 2 positions on the rear securing the HOLDER LATCH ( PL6.1.19) to the CHUTE
ASSY OUT.
7) Pull out the HOLDER LATCH rightward from the CHUTE ASSY OUT together with the LATCH OUT.
8) Remove the LATCH OUT from the HOLDER.
Replacement
Replace the components in the reverse order of removal.