3-186
RRP5.3 SENSOR TNR FULL (PL5.1.13)Figure: SENSOR TNR FULL Removal
Removal
1) Release the latch at A from the printer and open the FRONT ASSY IN (PL5.1.1).
2) Remove the BTR UNIT ASSY. (RRP8.4)
3) Remove the connector (P/J142) on the SENSOR TNR FULL from the FRONT ASSY IN of the printer.
4) Release the hooks at 2 positions securing the SENSOR TNR FULL to th e FRONT ASSY IN with a mini
screwdriver or the like.
5) Remove the SENSOR TNR FULL from the FRONT ASSY IN.
Replacement
Replace the components in the reverse order of removal.