1-90
FIP-P9 Crease
Condition / initial check
Crease on print
Print on creased paper.
Initial check
Incorrect parts, improper installation, damage, deformation, dirt, foreign su bstance attached, etc.
Major parts to be checked
PAPER FEEDER, CHUTE ASSY REGI, CHUTE ASSY OUT, Transfer Unit (BTR), FUSER ASSY
Item Check Remedy
1
Wet paper
Do the wrinkles disappear if the paper is replaced with
newly unpacked paper?
Replace the paper
(Ask the customer to store the paper in a
dry place)
2
Faulty FUSER ASSY
Check the HEAT ROLL and NIP BELT for evidence of
damage, dirt, or foreign substances.
Replace the FUSER ASSY
3Paper skew feed
Check if the paper is fed on the skew Go to FIP-P8
4
Faulty paper transfer path
Check the paper transfer path for presence of burrs,
foreign substances or dirt.
Clean or replace the parts concerned
5
Faulty paper transfer rolls
Check the paper transfer rolls for evidence of foreign
substances, dirt, deformation, or malfunction.
Clean or replace the parts concerned