MiTAC 7521 PLUS/N service manual 7521Plus / N N/B Maintenance

7521Plus / N N/B MAINTENANCE

3.To take the hard disk drive apart, remove two screws of the hard disk. Then lift the hard disk up and unplug the connector to remove it. (figure 2-9)

Figure 2-9 Figure 2-10

4. Remove four screws to separate the hard disk drive from the metal shield. (figure 2-10)

Reassembly

1.To install the hard disk drive, place it in the bracket and secure with four screws.

2.Connect the hard disk to the connector on the FDD/HDD module and secure with two screws.

3.Slide the FDD/HDD module into the compartment and secure with one screw.

62