5360 IP Phone – User Guide
To answer a call using Handsfree Answerback:
Phone state before Page arrives |
| To answer the Direct Page |
|
|
|
Phone is idle and MUTE | 1. | Check that MUTE is OFF. |
is flashing | 2. | Listen for the paging party. |
| ||
| 3. | Begin speaking. |
| 4. | Lift the handset if you wish to switch from a Handsfree |
|
| call to a handset call. |
You are on a handset or headset | 1. | Check that MUTE is flashing. |
call, and MUTE is OFF | 2. | Press MUTE. The light turns ON solid, and you are now |
|
| speaking to the paging party and have muted your |
|
| handset/headset call. |
| 3. | Speak to the paging party. Press MUTE to alternate |
|
| between handset/headset and handsfree calls. |
You are on a MUTED | The party paging you receives a busy tone. Handsfree | |
handset/headset call, OR, you are | Answerback does not interrupt your call. | |
on a Handsfree call |
|
|
|
|
|
To end a Handsfree Answerback call:
Press either 
(SPEAKER) or 
(CANCEL).
When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the call was established.
- 51 -
