5360 IP Phone – User Guide
Messaging - Callback
To leave a Callback Message when you hear busy or ringback tone:
Press 
(MESSAGE) or press the Callback softkey.
To respond to a message waiting condition on your phone:
1.Press 
(MESSAGE).
2.If a password is required, dial your password (and press the Enter softkey if available).
3.Press the Read Message softkey, and do one or all of the following:
To display the time the message was sent, press the More Msg softkey.
To display the number of the caller, press the More Msg softkey twice.
To call the message sender, press the Call softkey.
To delete the message, press the Erase Msg softkey.
To view the next message, press 
(MESSAGE).
You can check for messages from a remote station:
1.Press Superkey (must be programmed to a key).
2.Press the No softkey until "Remote Msging?" appears.
3.Press the Yes softkey.
4.Dial your directory number.
5.Press the Enter softkey.
6.If a password is required, enter your password and press the Enter softkey.
7.Press the Yes softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1.Press Superkey (must be programmed to a key).
2.Press the No softkey until "Set Password?" appears.
3.Press the Yes softkey.
4.Do one of the following:
To enter a new password, enter your password.
To change or clear your password, enter your current password.
5.Press the Enter softkey.
- 65 -
