Mitel 5360 manual Handset/Headset Combinations, Pairing the Cordless Module and Accessories

Models: 5360

1 106
Download 106 pages 25.09 Kb
Page 90
Image 90

5360 IP Phone – User Guide

Handset/Headset Combinations

The following combinations of corded and cordless headset and handset are supported on the 5360 IP Phone:

Corded handset only

Corded handset and corded headset

Cordless handset only

Cordless handset and cordless headset

Corded handset and cordless headset

Corded headset and cordless handset

The DECT Cordless Handset, DECT Cordless Headset, and Bluetooth Handset are all Mitel- branded accessories available only from Mitel. Bluetooth headsets are third-party accessories available from a variety of manufacturers.

Pairing the Cordless Module and Accessories

Before using a cordless handset or headset, it must establish communication with the Cordless Module using a procedure called pairing.

Pairing a DECT Cordless Accessory with a DECT Cordless Module

Notes:

An IP phone can have only one DECT Cordless Handset and one DECT Cordless Headset.

A cordless handset or headset can be paired with only one IP phone at a time.

Pairing a new cordless handset or headset with the IP phone overwrites the configuration of any previous handset or headset.

Pairing cannot be performed when a cordless device is already in use.

To pair a DECT cordless accessory:

1.Ensure that the battery of the cordless device to be paired is at least partially charged.

2.Press and hold the pairing button on the back of the Cordless Module (see page 79) for 5 seconds to activate phone pairing mode. The LED on the Cordless Module blinks. The Cordless Devices application opens on the phone and prompts you to place the accessory in pairing mode.

3.Press and hold the hookswitch on the side of the cordless handset (see page 84) or headset (see page 87) for 5 seconds to activate accessory pairing mode. The LED on the cordless accessory blinks. After a moment, the Cordless Devices application displays protocol, firmware, hardware, and IPEI information for the device to be paired.

Note: If the LED on the Cordless accessory does not start to blink after 10 seconds, the accessory requires charging or is still in factory battery saving mode (handset

- 80 -

Page 90
Image 90
Mitel 5360 Handset/Headset Combinations, Pairing the Cordless Module and Accessories, To pair a Dect cordless accessory