Mitel 5360 manual Using the Cordless Devices Application, Low Battery Level

5360 IP Phone – User Guide

USING THE CORDLESS DEVICES APPLICATION

The Cordless Devices Application provides access to module information and pairing for handsets or headsets.

To access the Cordless Devices Application, do one of the following:

Press the blue Applications key , and then press Cordless Devices.

Press a feature key you have programmed as the Cordless Devices Application key.

Note: When the pairing button on the Cordless Module is pressed, or when the battery level of a Mitel-branded cordless accessory is critically low, the phone will automatically open the Cordless Devices Application.

Low Battery Level

When the battery of a Mitel cordless device reaches a near-critical level, the phone displays a warning. Until the battery is recharged (or until it becomes fully discharged), the warning is repeated at each new call made using the Prime Line. To continue with a call while charging the cordless accessory, switch to speakerphone and then cradle the cordless accessory.

Viewing Cordless Module Information

You can use the Cordless Devices Application to view protocol, firmware, and hardware information about the Cordless Module attached to your phone.

To view Cordless Module information:

1.Access the Cordless Devices Application.

2.Press Cordless Module Info or Bluetooth Module Info. Device information appears on the screen.

3.Press Close to exit.

- 92 -