size of the scanned image file, it is better to select and scan only the necessary part of the image with selection area.

To adjust the selection area:

1.Move the selection area by pointing the mouse cursor to the selection area. When the cursor turns into a crossed arrow, click and drag your mouse to move the selection area in the Preview Area.

2.Adjust the size of selection area by moving the cursor over the edge of selection area. When the cursor turns into a double-sided arrow, click and drag your mouse to expand or shrink the selection area.

New Frame Button

Use the New Frame button to add a new selection area to the Preview Area. (To do so, you can also use the Duplicate button in Job List). First click this button, then move the mouse cursor into the Preview Area. When the cursor becomes a cross, click and drag your mouse to create a new selection area. The new selection area (scan job) you just created will also be listed in the Job List. You can use the buttons in the Job List to delete or view detailed information of that job.

Hand Button

The Hand button is used to move the preview image within the Preview Area. If the preview image is larger than the Preview Area, you can first click this button, move the cursor onto the preview image, then click and drag your mouse to move.

Zoom Button

Use the Zoom button to get a closer look at the preview image. Click on the Zoom button to enlarge the preview image. When the cursor turns into a magnifier, move it over the preview image, and then click on it. You can zoom out from the image by first pressing and holding “Alt” key on your keyboard and then clicking on the preview image.

Page 39
Image 39
Mitsubishi Electronics DV1248ST user manual New Frame Button, Hand Button, Zoom Button