3-62 Setting the Connection Environment
Setting Description Settings
Global IP
Address
Enter the global IP address.
If DHCP is enabled, the retrieved global IP
address is displayed, and you cannot edit it.
XXXX:XXXX:XXXX:
XXXX:XXXX:XXXX:
XXXX:XXXX format
(Where XXXX is a
hexadecimal number.)
0:0:0:0:0:0:0:0,0::0, ::,
0:0:0:0:0:0:0:1, and 0::1
cannot be entered.
Subnet Prefix
Length
Enter the subnet prefix length.
If a global IP address is entered, you cannot
enter 0 here.
0 - 128: 0
Default Gateway If you are using a gateway, enter the gateway
address.
XXXX:XXXX:XXXX:
XXXX:XXXX:XXXX:
XXXX:XXXX format
(Where XXXX is a
hexadecimal number.)
0:0:0:0:0:0:0:0,0::0, ::,
0:0:0:0:0:0:0:1, and 0::1
cannot be entered.
Port Number Setting
These settings are displayed when you click [+].
Setting Description Settings
HTTP Port
Number
Enter the port number of the HTTP server. 0 - 65535: 80
HTTPS Port
Number
Enter the port number of the HTTPS server. 0 - 65535: 443
OfficeBridge
Port Number for
searching
Specify the UDP port number used for
automatically searching OfficeBridge when
installing a printer.
0 - 65535: 61000
RAW port (Port
9100) Number
Specify the port number to use for the RAW
port.
0 - 65535: 9100
Click [Save].
4
Note
Underlined values are the default settings specified at the time of shipment. Click [Initialize] to restore the default settings. If you disable the DHCP setting, the IP address set when the DHCP setting was enabled becomes a static IP address. However, if the power is left OFF for an extended period, the setting may change. In this case, contact your administrator to set the static address.