NEC 1093099 manual Using Enhanced Last Number Redial

				Last Number Redial
			Using Enhanced Last Number Redial		In these instructions:
					[Super Display Soft Key]
					[Keyset Soft Key]
To redial your last call at a 3-line display telephone:
	• If you select a line key before going to step 1, the system outdials your most recent call when you press REDIAL.
1.		Press REDIAL.
		At a 3-line display telephone you see (for example):
		LAST 5 DIALED	[4]
		1-203-926-5400
		• The number to the right of the display shows the Last Number Redial record number (1-5). This is the total
		number of Last Number Redial calls stored at your extension.
		• To return to idle, press REDIAL again.
2.		(Optional) Press Volume Up or Volume Down to display the number you want to call.
3.		To redial the displayed number, do one of the following.
		a.	Press SPEAKER.
		b.	Lift the handset.
4.		The system tries to use the same line as that used for your initial call.
		• If that line is busy, the system automatically selects a line from the same group as your initial call.
		• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
		If you hang up, the system converts the queue to a Line Callback.
		- With Line Queuing, the number automatically redials when a line is available.
To redial your last call at a Super Display Telephone:
1.		Press REDIAL.
		At a Super Display telephone you see (for example):
		LAST 5 DIALED
		1-212-555-1212
		1-203-926-5400
		411
		913-555-8764
		555-4113
		• To return to idle, press REDIAL again.
2.		Press the soft key for the number you want to recall.
		• The store number dials out.
3.		The system tries to use the same line as that used for your initial call.
		• If that line is busy, the system automatically selects a line from the same group as your initial call.
		• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
		If you hang up, the system converts the queue to a Line Callback.
		- With Line Queuing, the number automatically redials when a line is available.
To erase (clear) all the numbers from your Enhanced Last Number Redial buffer:
1.		Press REDIAL + CLEAR.
2.		Do one of the following:
		a.	[YES]	Select to clear the buffer.
			[YES]
		b.	[NO]	Select to exit without clearing the buffer.
			[NO]

Features

DSX Feature Handbook Features ◆ 97