NEC IP8800/S6700, IP8800/S6600, IP8800/S3600, IP8800/S2400, IP8800/S6300 manual 146

5.Collecting Failure Information

2.Specify the address of target.

3.Changes the interaction mode.

4.Enter binary mode.*

5.Specify the target directory.

6.Transfers the dump file.

*

Be sure to transfer dump files in binary mode. The correct dump information will not be obtained if dump files are transferred in ASCII mode.

(2) Transferring log information to the remote operation terminal

Figure 5-3: Transferring Log Information Files to the Remote Operation Terminal

>show logging > log.txt

>show logging reference > log_ref.txt

> ftp 192.168.0.1		<--------------1
Connected to 192.168.0.1.
220	FTP server (Version 6.00LS) ready.
Name (192.168.0.1:staff1): staff1
331	Password required for staff1.
Password:
230	User staff1 logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ascii		<--------------2
200	Type set to A.	<--------------3
ftp>cd <target directory>
250	CMD command successful.	<--------------4
ftp> put log.txt
local: log.txt remote: log.txt
200	EPRT command successful.
150	Opening ASCII mode data connection for 'log.txt'.		807.09 KB/s	--:-- ETA
100% ************************************* 89019
226	Transfer complete.
89019 bytes sent in 00:00 (315.22 KB/s)
ftp> put log_ref.txt
local: log_ref.txt remote: log_ref.txt
200	EPRT command successful.
150	Opening ASCII mode data connection for 'log_ref.txt'.			--:-- ETA
100% ************************************* 4628			1.04 MB/s
226	Transfer complete.
4628 bytes sent in 00:00 (102.86 KB/s)
ftp> bye

221Goodbye.

>

1.Specify the address of target.

2.Set to the ASCII mode.

3.Specify the target directory.

4.Transfer the log information.

146