Manuals / NEC / Computer Equipment / Network Hardware

NEC IP8800/S6300 manual Checking the log and interface, Checking unicast interface information

Models: IP8800/S6700 IP8800/S3600 IP8800/S6600 IP8800/S6300 IP8800/S2400

1 250
Download 250 pages 34.34 Kb
Page 134
Image 134

3.Troubleshooting Functional Failures in Operation

(1) Checking the log and interface

Communication may be interrupted by a line failure (or damage) or a neighboring system failure. Check the log displayed on this system or the interface up/down status using the show ipv6 interface command. For the procedure, see "3.6.1 Communication Is Disabled or Is Disconnected."

(2) Identifying the extent of the failure (performed from this system)

If no failure is found on this system, a failure may exist somewhere in the route between this system and the remote system. The procedure to locate the failure in the route to the remote system and identify the failure range is as follows:

1.Log in to the system.

2.Use the ping ipv6 command to check communication between both parties. For an example of issuing ping ipv6 and how to interpret the result, see the manual "Configuration Settings."

3.If communication to the other party cannot be verified with the ping command, use ping to check communication to remote systems starting from the system closest to this system.

4.If the result of the ping ipv6 command shows that the neighboring system has failed, go to "(4)Checking NDP resolution information with neighboring system." If the result shows that the remote system has failed, go to "(5)Checking unicast interface information."

(3) Identifying the extent of failure (performed from the customer's terminal equipment)

If login to this system is not possible, follow the procedure below to identify the extent of failure to see the failure location in the route between the customer's terminal equipment and the other party.

1.Confirm that the customer's terminal equipment has the ping ipv6 function.

2.Use the ping ipv6 function to check communication between the customer's terminal equipment and the remote system.

3.If communication to the remote system cannot be verified with the ping ipv6 command, use ping ipv6 again to check communication to systems starting from the system closest to the customer's terminal equipment.

4.After the extent of failure has been identified using the ping ipv6 command log in to this system if it is considered to have failed and follow the failure analysis flow to check for the failure cause.

(4) Checking NDP resolution information with neighboring system

If communication to a neighboring system is not possible as a result of ping ipv6 execution, address resolution by NDP may not have been achieved. The procedure for checking the status of address resolution between this system and the neighboring system is described below.

1.Log in to the system.

2.Use show ipv6 neighbors command to check the status of address resolution with the neighboring system (presence/absence of NDP entry information).

3.If the address resolution with the neighboring system is achieved (NDP entry information is provided), go to "(5)Checking unicast interface information."

4.Confirm that the IP network setting on the neighboring system matches that of this system if the address resolution with the neighboring system is not achieved (NDP entry information is not provided).

(5) Checking unicast interface information

Check the route information acquired by this system if communication is not possible even when the address resolution with the neighboring system is achieved, or if communication is disabled in the midway to the other party during IPv6 unicast communication, or if the route to the other party is abnormal. Use the following procedure:

72

Page 133 Page 135
Page 134
Image 134
NEC IP8800/S6300, IP8800/S6600 Checking the log and interface, Checking NDP resolution information with neighboring system
Page 133 Page 135

IP8800/S6700, IP8800/S3600, IP8800/S6600, IP8800/S6300, IP8800/S2400 specifications

The NEC IP8800 series comprises a range of advanced networking solutions designed for various applications ranging from enterprise networking to service provider environments. This series includes models such as the IP8800/S2400, IP8800/S3600, IP8800/S6300, IP8800/S6600, and IP8800/S6700, each with its unique set of features and capabilities aimed at delivering robust performance, security, and scalability.

The IP8800/S2400 is an entry-level switch tailored for small to medium enterprises. It features a compact design and high port density, making it ideal for network edge applications. The model supports both Layer 2 and Layer 3 switching capabilities, enabling efficient traffic management. With its robust security features, including access control lists and support for VLANs, the IP8800/S2400 ensures secure connectivity.

Moving to the IP8800/S3600, this switch is designed for data center environments and offers high throughput with advanced routing capabilities. It is equipped with high-capacity 10G and 40G Ethernet ports, facilitating faster data transfer rates. The S3600 supports various protocols such as MPLS and Segment Routing, enhancing its ability to manage complex network architectures. Its energy-efficient design also helps reduce operational costs.

The IP8800/S6300 is tailored for high-performance networking scenarios, featuring a flexible architecture that supports both traditional and cloud-based services. With extensive QoS capabilities, the S6300 optimizes traffic flow and manages bandwidth efficiently, ensuring high-quality service delivery. Its virtualization support allows for easier integration into modern, software-defined networking environments.

The IP8800/S6600 provides a comprehensive solution for service providers and large enterprises, boasting high scalability and modularity. This model supports advanced features such as network slicing and the ability to handle high-density 100G interfaces. Its robust management tools, including centralized control and automation capabilities, simplify network operations significantly.

Finally, the IP8800/S6700 represents the pinnacle of the series, designed for mission-critical applications requiring the utmost reliability and performance. It supports advanced analytics, AI-driven insights, and comprehensive telemetry, enabling proactive network management. With high availability features and extensive redundancy options, the S6700 ensures continuous operation, making it ideal for core network functions.

In summary, the NEC IP8800 series offers a versatile range of switches that combine advanced technologies, high performance, and robust security features, catering to various networking needs across different industries. Each model is designed to provide not only superior connectivity but also the flexibility and scalability required in today’s fast-paced digital landscape.