Safety Guide [IP8800/S6600]

■Grounding is required.

•Leak current of up to 3.5mA flows for each device. If connecting the device with AC power, be sure to use the grounded outlet. If the power supply is used without grounding, an electric shock may be caused and failures may occur due to electric noise.

•When the device is connected to the DC power supply, be sure to connect the grounding terminal. If the power supply is used without grounding, an electric shock may be caused and failures may occur due to electric noise.

■Installing/uninstalling of the DC power cable must be performed by the trained engineer or maintenance personnel.

•Installing/uninstalling of the DC power cable must be performed by the trained engineer or maintenance personnel. DC power cable is connected to the power supply via a terminal. Therefore, inadvertent handling of the DC power cable may result in fire disasters or electric shock.

■Before installing or removing a DC power cable, turn off the breaker on power supply facilities.

•Before installing or removing a DC power cable, turn off the breaker on power supply facilities. Operation with the breaker on may cause electric shock.

■Attach insulation covers on the 0V and -48V terminals of a DC power cable.

•Attach insulation covers on the 0V and -48V terminals of a DC power cable (the side of which connects to power supply facilities). Operation without insulation covers may cause electric shock.

■When using the DC power supply, do not leave the terminal board uncovered.

•When using the DC power supply, be sure to attach the cover to the terminal board after connecting the power cable. Operating it without the terminal board cover can cause an electric shock.

■Do not touch the potential tap.

•The power supply is provided with the potential tap. This tap is used for inspection at shipment. Customer should not use this tap. Do not insert a sharp material such as pin or clip into the potential tap. Fire disasters or electric shock may be caused.

■The device must be carried and installed by at least three people.

•The table below shows mass of the devices. The device must be carried and installed by at least three people. Otherwise, a personal injury due to drop or fall may be caused.

Number of people to carry the device

Model

Mass

Number of people

 

 

 

IP8800/S6604

45 kg/100 lb

3 or more

 

 

 

IP8800/S6608

64 kg/142 lb

 

 

 

 

xix

Page 28 Page 30
Page 29
Image 29
NEC IP8800/S6300 manual Xix, Model Mass Number of people, IP8800/S6604 45 kg/100 lb Or more IP8800/S6608 64 kg/142 lb
Page 28 Page 30

IP8800/S6700, IP8800/S3600, IP8800/S6600, IP8800/S6300, IP8800/S2400 specifications

The NEC IP8800 series comprises a range of advanced networking solutions designed for various applications ranging from enterprise networking to service provider environments. This series includes models such as the IP8800/S2400, IP8800/S3600, IP8800/S6300, IP8800/S6600, and IP8800/S6700, each with its unique set of features and capabilities aimed at delivering robust performance, security, and scalability.

The IP8800/S2400 is an entry-level switch tailored for small to medium enterprises. It features a compact design and high port density, making it ideal for network edge applications. The model supports both Layer 2 and Layer 3 switching capabilities, enabling efficient traffic management. With its robust security features, including access control lists and support for VLANs, the IP8800/S2400 ensures secure connectivity.

Moving to the IP8800/S3600, this switch is designed for data center environments and offers high throughput with advanced routing capabilities. It is equipped with high-capacity 10G and 40G Ethernet ports, facilitating faster data transfer rates. The S3600 supports various protocols such as MPLS and Segment Routing, enhancing its ability to manage complex network architectures. Its energy-efficient design also helps reduce operational costs.

The IP8800/S6300 is tailored for high-performance networking scenarios, featuring a flexible architecture that supports both traditional and cloud-based services. With extensive QoS capabilities, the S6300 optimizes traffic flow and manages bandwidth efficiently, ensuring high-quality service delivery. Its virtualization support allows for easier integration into modern, software-defined networking environments.

The IP8800/S6600 provides a comprehensive solution for service providers and large enterprises, boasting high scalability and modularity. This model supports advanced features such as network slicing and the ability to handle high-density 100G interfaces. Its robust management tools, including centralized control and automation capabilities, simplify network operations significantly.

Finally, the IP8800/S6700 represents the pinnacle of the series, designed for mission-critical applications requiring the utmost reliability and performance. It supports advanced analytics, AI-driven insights, and comprehensive telemetry, enabling proactive network management. With high availability features and extensive redundancy options, the S6700 ensures continuous operation, making it ideal for core network functions.

In summary, the NEC IP8800 series offers a versatile range of switches that combine advanced technologies, high performance, and robust security features, catering to various networking needs across different industries. Each model is designed to provide not only superior connectivity but also the flexibility and scalability required in today’s fast-paced digital landscape.
Top Page Image Contents