NEC IP8800/S2400, IP8800/S6600, IP8800/S3600, IP8800/S6700, IP8800/S6300 manual Restarting the System

7.Restarting the System

7.1Restarting the System

7.1.1Restarting the System

The system can be restarted by using the reload command. Log is stored at restart time. For input format and parameter of the command, see the manual "Operation Commands."

IP8800/S6700, IP8800/S6600, and IP8800/S6300

The following is an example showing how to select the parameter of the reload command when "restarting the standby system" and collecting the CPU memory dump of BCU, CSU, and MSU according to the confirmation message.

Step1

Select whether to restart or stop the system.

Figure 7-1: Selecting Restart/Stop of the System

Select restart or

stop

	Restarting the
			Stopping the
		system		system
Parameter to input		None		Stop

As the standby system is restarted in Step 1, no parameter is selected as shown in figure above.

Step2

Next, select whether to collect the dump.

Figure 7-2: Selecting CPU Memory Dump Type

Select whether to collect

memory dump

				Not checking memory
	Collecting		Checking		dump collection
		Not collecting
	memory dump	memory dump	memory dump	Collects memory dump
			collection	when neither (checking/
				not checking) is selected
			None
Parameter to input		no-dump-image			-f
	dump-image
dump-image

160