NEC IP8800/S6600 Transferring dump files to a console, Transferring log information to a console

5.Collecting Failure Information

5.2.2Transferring Files Using zmodem Command [IP8800/S3600] [IP8800/S2400]

To transfer files between this system and the console connected via RS232C cable, the zmodem command is used. Before starting communication, prepare the communication program on the console for receiving.

(1) Transferring dump files to a console

Figure 5-5: Transferring Dump Files to a Console
> cd <dump-stored directory>	<--------------	1
> zmodem put rmdump	<--------------	2
>

1.Specify a directory where the dump files to be transferred is located.

2.Transfer the dump file.

(2) Transferring log information to a console

Figure 5-6: Transferring Log Files to a Console

>show logging > log.txt

>show logging reference > log_ref.txt

> zmodem put log.txt <-------------- 1

>zmodem put log_ref.txt

1. Transfer the log file.

(3) Transferring failure backup information files to a console

Figure 5-7: Transferring Failure Backup Information Files to a Console

>cd /usr/var/core/

>ls<--------------------------1

interfaceControl.core	nodeInit.core	<-----2
> zmodem put interfaceControl.core

>zmodem put nodeInit.core

1.Check if the failure backup information file exists. If no file exists, exit without any action.

2.Transfer log files.

5.2.3Transferring Maintenance Information Files Using show tech-support Command

Use the show tech-supportcommand when transferring maintenance information files to the remote operation terminal or remote host.

148