INSTRUCTIONS FOR USE

ENGLISH

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.

The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions, which are to be defined by the person in charge of the maintenance.

WARNING!

Maintenance procedures must be performed when the machine is off (ignition key removed).

Moreover, read carefully the instructions in Safety chapter before performing any maintenance procedure.

All scheduled or extraordinary maintenance procedures must be performed by qualified personnel, or by an authorised Service Center.

This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance procedures.

For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary maintenance procedures see the Service Manual that can be consulted at any Service Center.

For scheduled and extraordinary maintenance of the following optional equipments, refer to the relevant Manuals:

Salt spreader

Snow brush

Snow cutter

Camera kit

SCHEDULED MAINTENANCE TABLE

 

Running-in

Every 10

Every

Every

Every

Every

Every

Maintenance

period (after the

hours or

150

300

500

1,000

2,000

 

first 50 hours)

before use

hours

hours

hours

hours

hours

Engine oil level check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hydraulic system oil level check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine air pre-filter and filter cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine radiator fin cleaning check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine coolant level check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hydraulic system oil cooler fin check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery fluid level check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hopper, filter and suction hose cleaning, gasket

 

 

 

 

 

 

 

check and fan bearing lubrication

 

 

 

 

 

 

 

Water nozzle and filter cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brake fluid level check

 

 

 

 

 

 

 

Reverse gear buzzer operation check and sensor

 

 

 

 

 

 

 

adjustment

 

 

 

 

 

 

 

Diesel engine start-up safety system check

 

 

(8)

 

 

 

 

Engine fuel filter cleaning

 

 

(1)

 

 

 

 

 

 

 

 

 

 

 

 

Engine radiator fin cleaning

 

 

(1) (8)

 

 

 

 

 

 

 

 

 

 

 

 

Tire pressure check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Suction inlet and skirt height and operation check

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Side broom position check and adjustment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3rd broom position check and adjustment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hopper and suction hose gasket wear check

 

 

(8)

 

 

 

 

 

 

 

 

 

 

 

 

RS 1300

33015124(3)2008-02

33

Page 55
Image 55
Nilfisk-Advance America RS 1300 manual Scheduled Maintenance Table